LokSound Decoder Projects

The number of locos in the sound fleet continues to grow.  I am up to seven units with ESU LokSound decoders now. All new sound installs have been getting the 73100 Select Direct Micro with a 9x16 speaker/enclosure. Not sure what Im going to do with the loss of their hardwired short board going to the Next18 connector, but I have been able to get the 73100 board into all my needed six axle conversions... so far (Hello ESU?). With the size of the active fleet making it difficult to put sound in all units, the short term goal has been to at least get one sound unit in each lashup. Typically I run the sound unit as second in consist so the overall sound is coming from the “train” rather than just the lead unit, but really they all Need sound. As a result I have not been taking the time to complete the full SP light packages as on some before, but am planning eventually to finish the fleet in one mass production line someday... The easiest install has been the IM tunnel motors with basically a plug and play install, vs a couple most difficult old school Kato units that I had to do more grinding on the frame halves, to fit the board above/between the motor saddles. Just amazing what a jump in quality these are from my first Dgtrx sound installs, as these all run and sound just great. I was thinking I would have to add more capacitors to keep all these from cutting out when I first started, but I have not had any problems as long as I keep to the normal layout ops cleaning regimen.  I have been wiring the power feeds a bit different in an effort to keep cutout risk down to a minimum.

A 73100 specimen ready for implant into an Atlas SD9

How the above looks after install (power feed routing seen adjacent to speaker)

Results on a Kato SD40’s Guts

 The Kato U33C Grind (similar process on the SD40 also)

The tightest fit due to caps has been on the U33C

One of my old favorites, especially now with its FDL-16 chug

Box car fleet additions

Since the China factory shutdowns (and now Corona) the release of new products overall has been slow. Some of the backlog has finally started to hit the streets lately, but I have been getting frustrated from the lack of consistent product availability in N scale for quite some time (watching the HO scale pipeline isnt helping). I was happy to finally see the arrival of 4 new IM 50’ High Cube boxcars here, but the factory trucks and couplers just had to go. I replaced them with med draft MT 1037's for now, as the cars came with short shank body mount couplers and 36" wheels (just wrong). I mostly like the cars otherwise (x-LBF molds), but at some point I will body mount the extended draft couplers on them. By adding these cars to the layout, I was able to retire another block of stand-in MT 50’ SP/SSW boxcars that had never been up to my standards, and at this point I really wanted to get rid of more.  So I found 5 FVM 50’ FMC boxcars that had been forsaken on the back of my workbench that needed lowering. It was time to fix them and put my body mount Hydra-cushion couplers on them.

Before- you can see on the left how high these FVM double door boxcars rode as compared to a more accurate MDC/Roundhouse model 

After- is the lowered FVM with new extended couplers on left, coupled to the same MDC box (which has MT 1037 coupler). Note the difference where the etched platform now is with the coupler flush up underneath. This was done by grinding off some on the bolster, insetting the underframe deeper into the body, and notching the shell to make room for the extended body mount coupler (see body mount page).  The two cars have a different taper to the roof but are equal height at the peak.

The new fleet ready for assignment

Yes, they need a good layer of tunnel smoke too
I still have about 20 retired MT 50’ DD SP /SSW boxcars for disposal, if anyone is interested 

Kato SDP40F Issues

Was struggling with repetitive stalling on one of my Kabo Kato LokSound units. Found that the OEM pc board that the Kobo installer soldered to, was barely making contact to one half of the frame via the board’s spring tension design, and that was no longer reliable. I ended up having to hardwire the decoder by tapping in a pair of 00-90 screws to fasten my own solder pads, which the power lead wires now connect to. 

The new pair of rectangular brass terminal blocks/solder pads installed:

The final install with black and red power leads soldered to new terminal blocks:

At one time I swore I would never model a passenger train on my layout. Not sure what happened but Amtrak’s Coast Starlight became an obsession over the years. I acquired rolling stock for the train(s) and started a couple kitbashes of this loco, then revisited a number of times over the years, but never followed through on the builds. Needless to say, but these locos look, run, and sound great, so really enjoying both my trains  #11 and 14 now. The only missing car(s) in the trains are the Pullman Standard 44 seat leg rest coaches. Maybe Kato can come through on that one someday too...

Removable Woodchip Loads

Been awhile since updating the blog (18 months), due mainly to planned obsolescence of devices and job justification of platform interfaces (ha), but hopefully have things working again so I can again share pics and bits of recent layout progress.

One of the biggest stumbling blocks for the layout having a continuous operating scheme here (ending and restarting ops at any point), had been the large amount of woodchip car loadings. There are currently close to 40 chip cars on the layout moving between the paper mill, staging, and lumber mills.  With all the non standard load sizes the chip cars required, it didnt seem very practical to utilize removable loads. Another issue was how to empty each of these cars without having to lift (or reposition) them from the layout, to avoid excessive handling. I had been restaging each car between sessions manually, which was a big pain anyway. I needed a way to load and unload the woodchips!  After diving into the use of JMRI Ops, I knew I had to figure a way to make the fleet of chip cars have interchangeable loads. The idea of staging identical car numbers and using the program to swap loads and empties sounded ok, but trying to acquire a loaded and empty version of each car number now days is dismal with manufacturers today releasing only one limited run of models (too late now). 

The solution was a magnetic chipload removal system, and a numbering scheme for each car and load that was still semi-interchangeable.  

I glued a steel piece of 16 ga steel to the underside on one end of each chip load. A nominal sized ceramic magnet lifts the load readily as long as the load is not too tight fitting. 

A block of pink foam was glued to the load to expedite loading, so that it would seat evenly and not fall too deep into the cars. 

Since the load length was typical, but the width was not, I still had to number each car in a class to match loads numbered for multiple classes. This allows a variation of 4 different load types to fit multiple cars but mostly +/- one load tolerance size either way. I have a total of 6 load sizes (labeled as ABC, BCD, CDE, DEF), that fit those various car sizes. This system has proven to be fairly user friendly, and pretty reliable so far. 

Cars move from industry via locals to yard, then via manifests to staging, and eventually reverse the process to destination for load exchange. There is always enough overlap between movements to allow the sessions to continue without loading/unloading interaction during ops.

Now we can run up to a full day of ops, and pick up where we left off with minimal interaction as compared to the restaging I had previously been saddled with. 

With the visible car load plan now working smooth, I returned to updating my latest revision of JMRI Ops, which has already been refined multiple times over the last couple years, but is finally working pretty well. I put a printer under the layout to actively print out manifests for easy access to new paperwork. Trying to deal with a full keyboard and monitor around the layout is at times necessary, but not very user friendly, so am also remotely running the Ops program from iphone to the printer with VNC during sessions. This allows manifests / switchlists to be printed for crews and the yardmaster as the trains arrive and depart.  Need to squeeze in a trial run utilizing the CATS program to notify JMRI that trains are arriving, so that the later will build trains automatically, with less me... 

Lots of projects to get caught up on here in print, but if this posts well (already see some issues), I can resume postings again, or at least till technology gets ahead of me again.

:)

Happy RRing

Yard Panel Replacements

In an effort to complete the basic look of the layout,  the temporary foam board yard panels needed to be replaced so the curtain project could finally be completed.  The temp panels were just mounted to the facias with a few spacers, and were actually more durable than had been anticipated.  They definitely fulfilled their purpose in getting the layout up and operating fast.

The original / temp E. Eugene Yard Panel:

Each of the new replacement panels were made up from two sections to allow ease of installation and maintenance.  A hanger bracket, and the main panel section that simply screw together.  I made templates for the overall design and hole patterns.  Don cut and bent up the four steel panels at a 22 deg angle, so that they were more readily visible, yet didn't hang out into the aisle.

E. Eugene, W. Eugene, Portland, and Klamath Falls Panels:

Holes were drilled through the facia so the wires could pass through, as previously they were routed from under the facia, and were forcing the curtains to droop without support under the edge.  With the new panels being so close in design, I was able to do a direct swap of the existing toggles.

Wiring up the new E. Eugene Yard Panel with bracket in place:

The panels were designed to bolt to the face of the facia, but hang over the front to allow the Velcro strip along the bottom to remain uninterrupted  The felt curtains simply hang from the Velcro for ease of access under the layout.  Foam board scraps finish off the sides to provide end caps.  

Overhang to clear curtain access:

Nearing completion:

One down, three to go.

Bright Boys

The blog and layout have been dormant for over a year, partly due to needing a more active movement of cars without so much interaction. It was weiging me down, among other unrelated things / issues...  I've been working on the JMRI Ops Switchlist program, and have it flowing fairly well now, but still need to get it printing out on to my original copies of Espee Commom Standard forms.  But satisfied with where things were for now, it was time to run some trains again!
So I was using the Bright boy to clean track, and noticed the track wasnt getting as clean as it used to. I could run my finger down the rails after cleaning, and still get heavy black marks on my finger. I thought I had pretty much solved that old problem of dragging dirt around the layout, but it was back again. Years ago I figured out the Bright boy needs to be actively cleaned all the time. I have been using an old carpet scrap of indoor / outdoor carpet to rub both sides of the Bright boy back to its original brown color. For years I had just been slapping the carpet on the edge of the bench to keep it clean.  Lately I had thought my Bright boys were still pretty dark after their cleaning, and noticed that 5 year old carpet scrap staying pretty black too.  Well I decided to try running the carpet over to the sink with some warm soapy water, and it cleaned right up. Now the Bright boys are looking like new again and actually cleaning again.
Here's a quick vid on what kind of mileage you can get out of a Bright boy if you take care of it:
Clean that Bright Boy
Been working on some other projects that will post news on soon.

You Tube Vid - Layout Overview

Not much progress to report, as have been catching up on loose ends for the most part, along with a few operating sessions along the way.
While preparing for next weekend's Ops Sess, I figured catch some footage of Amtrak's eastbound Coast Starlight running across the layout, and post it as an overall progress report of the layout at this point.  Shows lots of baggage that needs to be attended to, and a lot of temporary states of completion needed to get by, but still having a good time with it after all these years...  its slowly beginning to take shape.   :)
Grab an icy cold one and enjoy.