CTC system now completed

Looking forward to the first Ops of the newly configured layout under CTC.  The signaling system held back progress for numerous weeks.  Quite a hurdle with the discontinuance of the LEDs we had been using, and the reverse in wiring methods used on the ribbon cables from the TC64 vs the SE8C cards....  and some additional labor hours that had not been anticipated for "Murphy".  Got a layout signal head project update right on the heels of this post....

Its getting close to six months again since the last run, but currently running trains to verify all systems for stability so I can send out Crew calls.

So the latest projects were, installing Hampton sky backboards, upper deck fascia install, and some painting.  All the shelving and throttle racks at the Yard Offices are painted black now, as well as all the latest fascia sections.  Fascias have all but one of the repeaters installed including signal icons and track diagrams.  Missing the Egyptian font station names until I get more decal paper to get those printed up (on this weeks to-do list).  Sky backboards were painted dark blue for the higher elevations, and a lighter blue for lower elevations.  Basically the upper deck will be all dark blue (Klamath Falls thru Oakridge), then the middle and lower decks will be the lighter blue (Hampton down thru Portland). 

Here is an overview shot of the latest stage of layout completion:

The porthole on the left is to monitor trains in the helix, and the one to its right will have more Conifer Tree Trickery to obscure the opening, but still allow visual contact with the Home signal at W Hampton (on the opposite side).  Still a few loose ends, but materials for the expansion's curtains have been secured, sky backboards still missing from the staging yard entrances, and still have a short uncompleted section on the backside (adjacent to the helix).... but happy with the progress as of late.